Why You Need Intermittent Mist – Reason #4
Reason 4 was: Once set up, the system runs with minimal supervision.
Once your intermittent mist system is properly installed, the only thing left is to set the program you want it to follow. Once set, the system will follow that program with little to no intervention.
Depending on the type of misting system you decide on depends on how much supervising will be needed. Mist systems that use two mechanical timers (one 24 hour, and one interval timer) require a little more supervision than a misting system that uses a digital mist timer.
Mechanically operated misting systems have many more components and moving parts than the newer digital ones. Below is a list of components needed for each type of system.
Mechanical misting system
- 24 hour timer
- interval timer
- 24 volt transformer
- water piping
- misting nozzles
- assorted wire (for high and low voltage)
Digital misting system
- digital timer
- water piping
- misting nozzles
- length of wire (low voltage)
The new digital misting timers replace the 24 hour and interval timer as well as the transformer. Along with replacing these components, the entire digital misting timer takes up much less space. Two mechanical timers along with the transformer will take up an area about 12 inches by 18 inches, where the digital timer will take up an area 4 inches by 8 inches and include both timers and transformer.
Two other features of the digital misting timer worth mentioning are the ability to use the timer to control 6 entirely different misting beds separately and the battery backup.
Mechanical misting systems generally control only one misting bed (or “zone”) with only one program. Every cutting in the bed (“zone”) gets the same amount of mist. Digital timers increase the number of beds (“zones”) you can mist by five times as mechanical systems. They accomplish this by being able to have 6 entirely different programs, one for each “zone”. Each zone operates independently of each other.
The battery backup is by far the best feature of the digitally controlled misting system. In the event of a power failure, the battery will retain the program that was set. Once power is restored, the timer automatically knows whether it needs to mist according to the program, or whether it needs to wait until the next day. In the event of a power failure with mechanically controlled misting systems, YOU have to physically adjust the 24 hour timer to get the system running again. If you are unaware that the power had gone out for a number of hours, the mechanical systems program will be off by the same number of hours. Your cuttings could receive mist during the evening hours which may lead to stress, or receive no mist at all during the hottest hours of the day which would surely kill them.
Intermittent misting systems that use digital timers require only minimal supervision to ensure the system is operating correctly, there are no broken pipes or leaks, and to ensure the cuttings are getting the correct amount of mist. This can usually be accomplished in a few minutes time, then you can walk away knowing the system is taking care of everything all by itself.
Dwayne Haskell owns and operates Mistkits.com where complete misting kits, individual components, and advice can be found. After building his own misting system for his nursery, he realized he could design and build systems for small nurseries or home gardeners who are interested in starting their own plants from cuttings.
He has written an E-book titled Build an Arbor in Just One Weekend, and another on gardening, landscaping and plant propagation tips. He also enjoys teaching others how to grow their own landscape plants and owns and moderates the Mistkits blog, where you can find more articles, polls, and quizzes on landscape and gardening related topics.
You are free to reprint or use this article so long as my author resource box is left intact with all links active.
Article Directory: EzineArticles
Misting is Becoming the Favored Backyard Cooling and Pest Control System For Your Backyard
This guest article talks about the history of keeping cool. If you don’t have your own flabellum-bearing attendants, you may be ready instead for an outdoor mister system, or you might consider making a personal misting fan using a typical household fan and our fan misting kit.
Misting is Becoming the Favored Backyard Cooling and Pest Control System For Your Backyard
Back in the early days of Christian Europe, no monarch or noble would venture out without an entourage of flabellum-bearing attendants. The flabellum is an instrument made of metal or feathers used to ward off insects and provide minimal ventilation. When the first crusaders came back from the Middle East, they brought with them a strange implement that gradually replaced the flabellum: the hand-held fan.
For many centuries after being introduced by the crusaders, the fan was the only instrument used to provide artificial instant cool ventilation. That was until Omar-Rajeen Jumala developed the first functional mechanical fan back in 1832. Jumala’s “air pump” was initially used in factories and mines. But when Thomas Edison pioneered electrical power, the electric fan was manufactured en masse and became a standard household feature.
Yet the traditional fan basically lacks the power to provide relief during sweltering hot summers. So another innovation was born: the mist cooling system.
So how does a misting system work?
A basic misting system is made up of a motor, pump, and a blower/fan. It uses direct evaporative cooling or flash evaporation, which is the natural phenomenon wherein evaporation of a liquid (e.g. water) into surrounding air cools an object that comes in contact with it. The motor powers the blower which propels out water droplets delivered by the pump. During the process, water is changed into vapor quickly. The surrounding warm dry air is then cooled by the influx of evaporated water from the mist cooling system.
There are two general types of misting systems that are available right now: indoor mist cooling systems and outdoor mist cooling systems.
Going to open-air restaurants, major outdoor festivals, or just into your patio during the summer months would generally be undesirable because of the heat. However, things have changed and there are now outdoor systems that can be installed in patios or outdoor restaurants, and outdoor portable misting systems that can be rented for special events.
Indoor mist cooling systems are also becoming popular these days. There are several reasons why more and more people are considering indoor mist cooling systems over traditional air-conditioners.
For one thing, most indoor air-conditioning uses CFC and ammonia as cooling mediums. CFC is arguably a hazardous compound, both to man and the environment. The good thing with indoor mist cooling system is that it does not use any dangerous compound.
Also traditional air-conditioning units decrease the humidity in an enclosed area while air is being circulated. This cold dehumidified air can cause your skin to become dry. Studies have also shown that cold, non-humid air can also cause muscular pain and other health conditions. So an indoor mist cooling system is really a good alternative to traditional air-conditioners.
Greg has been writing articles for over 4 years. Please visit his latest website about the coolest home improvement at Mist Systems, with information on finding the best mist cooling system available, as well as ideas and discussions that any home improvement enthusiast would be interested in.
Article Directory: EzineArticles
How Does a Patio Misting System Work?
How does a patio mister work? Well it depends on which system you use. There are basically two types of misting systems on the market. One is an expensive system that utilizes a pump to pressurize the water and send it through pipes and tubing to spray out a nozzle in a fine mist. The finer the spray, the quicker it will evaporate, creating a cooling sensation. A good system will lower the ambient air temperature up to 30 degrees.
There are several different versions of the more expensive system, the main difference being the pump itself. In the lesser quality systems, the pump is fairly loud. With the high end systems, the pump is almost silent. You can build a screen around the pump and eliminate most of the noise and hide the system out of sight.
The inexpensive systems rely on the house hold water pressure to send the water out the spray nozzles. At one time, the quality on this type system was disappointing. The droplets were very large, which resulted in a light rain falling on you and your patio, getting everything wet in the process. It also only lowered the ambient air temperature about 10 to 15 degrees.
There have been some pretty innovative changes in the past couple of years in the spray nozzles. These now produce a finer mist at normal water pressures. As a result, the majority of the mist evaporates before it falls. This results in a lower ambient air temperature with much less mess. These systems can lower the temperature between 20 and 30 degrees, almost as well as the more expensive systems, and at a fraction of the cost.
If you are planning on getting a patio misting system, you need to determine your budget. Obviously, if money is not an object, you can opt for one of the expensive, commercial grade quality misting systems with a pressurizing pump. This will give you years of reliable service and will increase your home value.
However, for most of us, we are limited to how much we can spend on a misting system. You can choose an inexpensive system, that hooks up to your garden hose, which will produce large droplets and soak everything on your patio. Or, for about the same price, you can get a better quality system that will produce results like the systems that cost ten times as much.
When it comes to patio misting systems, it pays to do the research and find which system produces the best results.
If you want to cool your patio, a patio misting system is the way to go. At http://www.patio-mister.com you can learn more about how a patio mister will keep you cool.
Article Directory: EzineArticles
Mist Propagation of Rooted Cuttings – A Primer on Intermittent Misting and Rooting Cuttings
Why use intermittent mist?
Using intermittent mist to root cuttings of woody ornamentals and perennials is one of the most efficient means of asexually reproducing large quantities of plants. Intermittent mist offers a means of automatically supplying moisture during the critical periods of propagation by using timers that control the delivery of the misting water on a precise schedule. Without intermittent mist, cuttings need to be kept in a humidity and temperature controlled environment to keep them from wilting and dying from overheating and transpiration. Transpiration is the evaporation of moisture from a plants leaves, stems, flowers, and roots. Intermittent mist raises the humidity level around the cuttings, which lessens the transpiration process and allows the cuttings to form a callus and root, and reduces the temperature around the cuttings. All this can be accomplished without the need of an expensive greenhouse which requires temperature and humidity controls.
Under ideal conditions, certain softwood cuttings can root under intermittent mist in as little as 2-3 weeks, allowing you to root multiple batches of cuttings in a single growing season.
Outdoor Misting
There are many variations on misting facilities, and one style does not fit all. Large propagators may use large misting houses with elaborate lighting and plumbing, while smaller family owned nurseries may use simple hoophouses or root the cuttings in sand beds right outdoors using simple misting systems and natural lighting.
Proper location of an outdoors misting area is extremely important for success. Too much sun or wind can be very detrimental to the cuttings. Filtered shade throughout the day is best, as is a location out of direct wind, but these can be overcome with artificial shade and baffles to deflect the wind. A simple structure can be built around the misting area and shade cloth or lattice can be used with great success to reduce the sun and wind.
Rooting medium
The proper rooting media is critical when rooting cuttings under intermittent mist. Sand has been used with great success for many years, however, a mixture of peat moss with an equal amount of perlite, vermiculite, or sand is an even better rooting medium. The peat/perlite, peat/vermiculite, or even a peat/sand mixture is superior to sand alone because it will be more porous, well aerated and better drained than sand alone.
Mist duration
The correct duration and interval of mist is critical to the ability of the cuttings survival and success at rooting. Too little mist or too much time between mists will result in the cuttings drying out, wilting and dying. Too little mist will also result in the cuttings overheating which will also result in the cuttings dying. Too much mist or too little time between mists will result in a constantly wet cutting and constantly wet rooting medium. This will result in leaf drop, stem rot, and fungus and diseases. A good basic starting point is a 5 to 10 second misting period every 5 to 10 minutes.
Temperature
One factor often overlooked while rooting cuttings is the temperature around the cuttings. Air temperature should be kept between 50°F and 69°F. Slightly higher air temperatures will not harm the cuttings, but lower temperatures can be detrimental to the cuttings. The rooting medium ideally should be kept between 65°F and 75°F to promote callusing and root development. One way of maintaining proper medium temperature is through soil warming cables placed under the medium. These cables will automatically maintain the proper temperature of the medium, creating ideal conditions for callus forming and root development. A plant develops roots as long as the medium temperature is above 45°F, so maintaining the temperature of the medium above 45°F can greatly increase the ability of the cuttings to form roots.
Care of a rooted cutting
After the cuttings have developed roots, the frequency of mist should be gradually reduced to begin hardening off the cuttings and to get them accustomed to normal growing conditions. Over the period of a month or so, the water should be reduced to a once a day watering. The cutting are now ready to be transplanted into pots, grow beds, or planted into the landscape. Potted plants should continue to be watered once a day. The new plants in grow beds or planted in the landscape should be watered once a day for a few weeks, then once every two or three days for a few weeks. After about a month, the plants should established enough to be watered only during long dry spells.
For a free report on intermittent misting, including an overview of intermittent misting and how to build your own intermittent mist system, visit the Intermittent Mist website. Grab your free report today!
Article Directory: EzineArticles
Drive away the summer heat using misting fans
The summer generally brings in sweltering heat throughout the country. The heat becomes unbearable to people not only in the hottest regions but to all and sundry. Environmentalists and critics keep on cracking the actual reason for the intensifying heat but fail to conclude. Some blame it on the manifestation of global warming while others argue that it is just a natural phenomenon. Whatever the reason, it has become unbearable to combat the scorching heat.
It is a real distress to go outdoors during the summer days as you would be exuding large amount of sweat throughout. Even though sweating is natural reaction, we don’t want to be sticky whole throughout. And if you want to perform any outdoor activity like gardening, sports or even garage work, you would really have a tough time. But there are many ways to overcome the summer heat. The misting fan has been gaining popularity among the masses as they find it as a great solution for summer trauma.
Misting fans are basically like an electric fan with motor and blades. It has a pump that stores water which is been pressurized and sprayed out through a nozzle. The water droplets would be very small in diameter and as soon as they are spurted out, the air propelled by the fan would evaporate it quickly thereby lowering the temperature in the surrounding area. The misting fans are capable of lowering temperature up to 30 degree Fahrenheit. The misting fans are generally seen at sports arenas where they would provide a soothing effect to the sweating players. They can also be used in your backyards and patios to get the cooling effect. Moreover, the misting fan would drive away insects like mosquitoes, wasps, spider etc from coming to the area. The dust and odors that accompany summer days can also be avoided by using misting fans.
Before buying a misting fan, you must clearly understand your needs and available spaces. For domestic use, the commercial sized large fans cannot be used. The size and capacity of the misting fan should be considered. Try to get a moderate fan that would give sufficient cooling in your backyard. Small fans are always convenient for backyard and pool-side. They are readily available in the market. If you have a big backyard area, you must go for a large capacity misting fan. They would have a cooler which can be filled with cold water. The fans are capable of creating real cooling mist.
The best time for purchasing a misting fan would be the late springtime since there wouldn’t be much need for the misting fans then. The off season would also allow you to bargain the prices. Even if the fans would be an old model, you wouldn’t find any difference if it can give ample misting effect. Remember to keep the fan in the shades to provide cooler mist. It is better to cool the water source from direct sunlight as the heat would in turn heat up the water. If you go for vertically mounted fans, they can be placed on the ceiling of your patios. Thus it would stay out of the way and give cooling relief during barbecue parties.
John peter is an expert SEO copywriter for portable misting systems, outdoor mist cooling system, patio misters, sun shades, shade sails, patio misting systems, mist system, patio misting, shade structures and more. For more information visit our site cool-off.com. Contact me at cooloffarticle(at)gmail.com
Article Directory: Article Dashboard
Garden and Greenhouse Watering Systems
All gardeners want to get the most out of their greenhouses, especially when they have invested in finely crafted structures like the greenhouses sold by Gabriel Ash. Once the greenhouse is assembled and furnished with benching and shelving it is ready to be filled with seedlings and plants. Many people find that a greenhouse can be a lot of work, especially during the summertime when the plants
The best home misting system for you
During summer, having an air conditioner outdoor may be relaxing for family members. During the peak of summer months, people avoid staying outdoors as the heat is oppressive and levels of humidity can make things worse. Home misting systems can help you substantially overcome this problem and make your outdoor life comfortable.
Your pool or the patio or garden space can be cooled quickly by as much as 35 degrees due to home misting systems. Buying a home misting system can be very effective for people wishing to spend long hours outside their homes and have fun.
Misting systems are used outdoors in most cases and during hot climates to keep people cool. Misting systems save your skin from incalculable harm that sun’s powerful radiations are capable of. They also keep your pets cool and devoid of uneasiness during the scorching summer months.
There are available in the market a wide range of misting systems and misting fans to meet the outdoor cooling needs of home owners. These misting systems and misting fans are capable of reducing outdoor temperatures by as much as 25 degrees. Through the use of different levels of technology, these systems can provide outdoor cooling to meet all types of needs.
The Low-Pressure Misting System Kit connects directly to a water hose and operates with the standard home water pressure. This professional quality low-pressure misting kit comes with all parts for an easy installation and trouble-free maintenance. This 16-inch Oscillating Misting Fan for homeowners reduces surrounding temperatures with a high-velocity, 3-speed shower-proof motor and immersion-shock protection. The misting fan is quite affordable and long-lasting.
The Mid-Pressure Misting pump can convert a low-pressure system into a mid-pressure system. Simply place a mid-pressure pump between the water source and the supply line, provide electricity, and the pump will appreciably increase the water pressure. This system produces smaller droplets which provide a finer mist that evaporates quickly. The pump works in conjunction with either our low-pressure misting systems or our misting fans.
High Pressure misting systems are chosen for applications where maximum cooling is needed. These applications would include not only residential places but other commercial establishments like restaurants, amusement parks, sports stadium, hotels and resorts. High Pressure misting systems can also control odors and dust that contaminate the environments. High pressure systems are also used for fire and smoke control, frost protection and visual effects in a pool, garden or other areas.
You can also build your own home misting system. All you need will be a garden hose, a 0.75 garden hose adaptor and a spray bottle with a screw type cap. Your existing domestic water supply should suffice. The materials needed are commonly available in the market and can be obtained easily.
First, clean the spray bottle and its cap thoroughly to remove dust and other particles that may obstruct the effective functioning of the misting system. Screw up the hose adapter to the bottom of the nozzle of the spray bottle making sure they are fastened tightly to prevent possible leakages. Now attach the hose to the adapter as securely as possible to prevent any immediate or future leakage.
Allow the water to pass through at a low speed. Now rotate the cap on the nozzle of the sprayer bottle so that water escaped freely. The amount of water that comes out and the speed at which it comes out solely depends on the nozzle that you use. You may be required to tape or glue some parts so that water flows out freely and at the right amount.
John peter is an expert SEO copywriter for misting systems. He has been written many articles like pool cabana, wooden market & paraflex umbrella, water misting fans, high pressure misting, shade structures, sun shades and more. For more information visit our site cool-off.com. Contact me at cooloffarticle(at)gmail.com
Article Directory: Article Dashboard
Pros of misting systems
A misting system will cool down the temperatures wherever you install it. They are a blessing during those summer days when it is highly impossible to be comfortable with ourselves. An outdoor one is the one which can cool down your patio, deck, porch, pool or any other living area. They will guard you from the atrocities of immense heat radiations. Super fine water drops are let out in the air which cools the atmosphere instantly through vaporization. Even flying insects will be kept at bay while you use a misting system. Your pets will pose a happy and comfortable behavior in such an environment.
Heat Reduction
The main and mainly apparent pro of misting is the nearly instantaneous air temperature plunge that occurs. Adding together dampness to the air can diminish the air warmth by up to 35 degrees F. They work on the method of waterfall and the surroundings atmosphere. If you had visited a waterfall you would’ve noticed that the surrounding atmosphere of the waterfall is much cooler than usual air temperature. It is because the water droplets that are produced by the fall into the atmosphere absorb the heat that is in the air that surrounds them and disperses it.
Hose End
It is not a must to buy a whole misting system. You can buy a small personal one to treat a smaller area. There are personal ones that keep you cooler while you spend time by the pool or anywhere alone. A garden hose is sufficient to keep it working and cooling the space that you prefer to be.
Flying Insect restriction
One more not so apparent misting advantage is that the mist keeps airborne insects at bay. It is efficient against flies, wasps, mosquitoes, hornets, wasps and even spiders. The mist will stick to them and become heavy on them so they will be incapable to fly. The structure also cleans the immediate air of pollen, dust mites, smoke, dust and other common pollutants.
Other Uses
Your pet animals will show a positive behavior change while they are under the influence of a misting system. They are sensitive to heat. A cooling structure will get them back on their toes bright and with lot of joy.
Sultry Days
The system serves as the one that adds more water and humidity to the atmosphere. It works at its best while at a humidity level below 40%. If you are living in a humid area you would be required to get the air circulating to keep the structure effective. You can do this by placing table fans outside. It can definitely work wonders to all.
John peter is an expert SEO copywriter for shade sails. He has been written many articles like misting systems, pool cabana, wall mount umbrellas, high pressure misting, mist systems, fogging systems and more. For more information visit our site cool-off.com. Contact me at cooloffarticle@gmail.com
Article Directory: Article Dashboard
A Misting System For Your Greenhouse
Below is a good article about greenhouse misting systems. However, there is a small inaccuracy about plastic mister nozzles versus brass or stainless steel mister nozzles. He states that plastic nozzles can “repel lime and other deposits.” Most of us who have hard water, like we do in Phoenix and the Verde Valley, have seen plastic showerheads caked with mineral deposits. We know that plastic does not repel hard water deposits!
Metal mister nozzles don’t “repel” lime deposits either, but they’re easier to clean than plastic, and being metal they resist wear better than the soft plastic. With regular maintenance and proper filtration, they’ll easily outlast plastic nozzles. And their spray is more consistent because the orifice is more precise, being bored into metal rather than soft plastic. In our experience, misting systems made from plastic parts wear out faster and don’t hold up well. They’re prone to breakage, leaks, and blowouts. The only advantage to plastic is low initial cost – but if you’re serious about your misting system you’ll eventually end up upgrading to a reliable stainless steel misting system with our metal misting nozzles!
To disperse a fine spray, which would be preferable in a greenhouse environment, requires a high pressure misting system. We would never advise anyone to use a plastic misting system under high pressure! Always use copper or stainless steel line, with similar fittings and nozzles. If you must use plastic, be sure to use high-pressure hose that’s rated for high pressure.
A Misting System For Your Greenhouse
Greenhouses have become important tools in plant cultivation. They provide much needed growing rooms for places which are not very conducive for the development of certain plants. They allow the cultivation of plants in places which could grow these plants normally.
There are many factors which can affect the development of plants inside a greenhouse. The proper balance of air circulation, ventilation, humidity, shading and heating will provide the plants with an optimum environment.
Misting
Other factors will such as ventilation and shading, are important for prevention of overheating in the greenhouse. However, proper misting or the control of humidity is the main factor which maintains a comfortable environment for the cultivation of plants. Evaporation uses up heat when it turns water from liquid into a gas. When the venting process is done, much needed moisture is lost from the greenhouse because it escapes into the air. Misting is one of the ways to replace the lost moisture inside the greenhouse.
The amount of moisture which is needed to be maintained by the greenhouse is dependent on several factors such as the amount of shading and ventilation that is provided, the status of the local climate and the fluctuations in the daily weather. The rule of thumb is that for each 10 square-ft of area, there must be 1-2 gallons/hour of moisture. A misting system will effectively distribute moisture evenly to all the parts of the greenhouse. A good misting system can disperse water in a fine mist, this will prevent the plants from being soaked.
Misting systems reduce temperatures by as much as twenty-five degrees F which is about 14 degrees Celsius.
Here are some facts about misting systems
-Misting systems can be used to disperse water in an ultra fine mist or a very coarse spray. The size of the droplets can depend on the nozzle type, the spacing of the nozzle and the operating pressure.
-Misting systems are used for many different kinds of applications aside from its normal greenhouse chores. They can be used from dust suppression, controlling static electricity control and concrete curing.
-Misting systems utilize pumps which are designed for intermittent or continuous duty. Intermittent pumps are designed to sprinkle water for five minutes and rest for a minute in between misting.
-Misting systems now come with electronic timers which can be programmed to mist 1-14 times a day with each misting ranging from 1 minute to 24 minutes. Other systems can be programmed to mist in shorter durations but more often.
-Nozzles are made from brass or plastic materials. The brass nozzles can be easily affected by minerals that abound in the water supply. The plastic nozzles can tolerate these minerals and can actually repel lime and other deposits.
-The amount of water which is needed to maximize the efficiency of the misting system can be calculated by multiplying the rate of the nozzle flow per minute by the number of nozzles in the system and the result will then be multiplied again by the minutes that the misting system will be in operation each day. This result will be a good estimate of how much water is needed by the system.
-Most misting systems today offer pumps which are almost noise-free. They will not affect the plants and especially the people near the greenhouse.
-Misting systems can be supplemented by an evaporative cooler. They work very well in dry climates (where humidity is below 50%). The air is cooled by around 10-20 degrees by the water which is evaporated because they are drawn through the cooler and then into the greenhouse. Too much humidity can be a problem and this is why people should water the plant only when they need it.
-The use of tools which can measure humidity can also be very helpful for greenhouse enthusiasts.
There are other factors that need to be considered in greenhouse plant cultivation. Misting is just one of them. Misting provides the plants with much needed cooling for the plants. There are many tools out there that are available for greenhouse plant cultivations which can immensely increase the quality of their greenhouses especially in terms of misting. A cultivator just needs to find out what kind of misting system should be employed for his plants.
Read about bloodgood maple and types of maple trees at the Plants And Flowers website.
Article Directory: Article Dashboard
Advantages of a Mist Cooling System
The oppressive heat of summer is a matter of great inconvenience for many. Misting is a proven way to combat and bring down the temperature and add moisture to the dry air at the same time. The important fact is you are cooling the outdoors, where air conditioning is not feasible. A correctly installed, quality mist system allows you to enjoy your garden and patio even on the hottest day.
There are six different types of misting systems – Low Pressure, Mid Pressure, High Pressure line systems and Low Pressure, Mid Pressure, High Pressure Misting Fan Systems. Each type of these misting systems has its own advantages and some disadvantages as well.
Low pressure, mid pressure, high pressure misting line systems use an evaporation technique to cool the air around misting lines that are positioned along the perimeter of the area to be cooled. Water is forced through specially designed nozzles to spray droplets of water into the surrounding air. These water droplets absorb the heat present in the atmosphere and evaporate, becoming water vapor or gas. The heat used to change the water to a gas is eliminated from the atmosphere and thus the air is cooled.
Misting fan systems are based on the principle that outdoor cooling works best when evaporative cooling or line misting is combined with convective cooling or, in other words, cooling of moving air. The mist basically cools the air and the fan intensifies the cooling effect. To understand this concept, think of the ocean where breeze blows across the evaporating water, providing nature’s most effective cooling system.
The biggest advantage of low pressure misting line systems is that they are very inexpensive and very easy to install. They all use your existing water pressure from your faucet without the need for a misting pump to create mist and you are not required to buy any further gadgets.
Mid pressure misting line systems are essentially low pressure mist systems combined with a small booster pump of between 120 and 160 psi. The droplets evaporate more efficiently, resulting in less residual moisture.
High pressure misting line systems are indeed the best. They are the misting systems that you see and enjoy in outdoor restaurants and amusement parks. Our high pressure misting systems use pumps that produce 1000 psi or more to create tiny droplets that evaporate almost instantly.
Like the low pressure misting line systems, the advantage of low pressure misting fans is they are inexpensive but more effective for the limited area that they cover than low pressure misting line systems.
Unlike with misting line systems, the mid pressure misting fans are not just low pressure fans with mid pressure pumps. They are high velocity fans with a low priced; mid pressure pump of 160 psi that improves the quality of the mist over low pressure fans.
High pressure misting fan systems are the ultimate in outdoor cooling and cannot be improved further. They are decidedly more effective than high pressure misting line systems. The high pressure misting fans use pumps that produce 1000 psi or more to create tiny droplets that evaporate almost instantly. The high velocity fan creates significant air movement to spread the cooled air across a large area.
The horrid heat of summer can often make outdoor events uncomfortable and that is where the installation of mist cooling systems becomes so valuable. Mist cooling systems also allow for considerable savings on energy. It has been effectively used by various industries all over the world.
John peter is an expert SEO copywriter for mist cooling system. He has been written many articles like misting systems, shade sails, paraflex umbrellas Patio Misting Systems, shade structures, pool cabana and more. For more information visit our site cool-off.com. Contact me at cooloffarticle(at)gmail.com
Article Directory: Article Dashboard
Misting Can Be More Than Just Backyard Body-Cooling Systems
These days, misting systems are getting more popular than ever. There are two kinds of mist system designs that are sold in the market these days. The first type uses a high pressure pump to send the water out through pipes and tubing unto the nozzle to jet out a fine mist of cool, evaporated water. A high pressure mist system would typically lower the ambient air temperature up to 30 degrees Fahrenheit.
The other common type of misting system utilizes household water pressure to send out water through the nozzle. Before, this kind of mist system does not jet out fine water droplets. However, improvements have been made and this system is now able to send out fine mists of water and lower the surrounding air temperature between 20 to 30 degrees Fahrenheit.
A type of these systems has been around since the early 1900s. Today, they are used for several different purposes.
Patio Misting System: One of the most favorite family activities during the hot summer months is to hang out of the patio. Most patio systems these days use high pressure pumps that jets out fine mist that cools the air around the patio and improves the atmosphere around the patio.
Greenhouse System: Controlling humidity and temperature is a bane for most greenhouse operators. If humidity is not maintained properly, a plant’s growth may be impeded. With a good misting system, a greenhouse can maintain optimal humidity and temperature, which will ensure that greenhouse plants will grow healthier.
Insect Control System: The outdoor is home to numerous bugs, such as, mosquitoes. It is also the place where your kids want to play during summer. Fortunately, insect control mist systems are available in the market these days. Most of these systems use environmentally friendly and natural insecticides (like pyrethrum) and spray it over the yard or the area where you want your kids to enjoy playing.
Dog Kennel System: Your dog is part of your family. So it is really frustrating to see your dog suffer during blazing hot summer days. Dogs do not have an efficient method of handling heat stress. There are instances when dog owners went out for shopping and return after an hour or so to see that their dog has died from heat stroke in the kennel. Many dog owners do not want this to happen to their dogs. So a cooling system for a kennel is really a good investment for dog lovers. Most kennel misting systems are easy to set up-you can just attach it to a garden hose near the kennel and you got your dog basking comfortably amid the sun and cool mist jetting out from the mist system.
There are many other uses of misting systems. If you want to buy a mist system for a particular application, then you can just browse the Web. There are many sites that offer great bargains for various types of mist systems. These sites normally specify the specifics of the mist system and feature pictures or videos how these mist systems are used.
Greg has been writing articles for over 4 years. Please visit his latest website about the coolest home improvement at Mist Systems, with information on finding the best mist cooling system available, as well as ideas and discussions that any home improvement enthusiast would be interested in.
Article Directory: EzineArticles
Using a Misting System to Root Softwood Cuttings – Part 1
Why use a misting system?
Rooting cuttings is actually quite easy when using a misting system. Prior to misting systems, nursery owners and plant propagators had to use other methods such as wooden boxes with glass or plastic covers over them. These covers kept the cuttings in a moist environment which allowed them to root. A few drawbacks to this method is the length of time and possibility of creating the right conditions for diseases and fungus.
Intermittent mist allows the propagator more control over the conditions the cuttings are in. The frequency and duration of the mist can be controlled to allow the cutting to get the correct amount of moisture to keep them hydrated and cool. Hydration and temperature control around the cutting are vital to the cuttings ability to form roots.
Keeping the cuttings hydrated is essential to successfully root softwood cuttings. The moisture that is deposited on the cuttings leaves and rooting medium allows the cutting to live without roots. the moisture is drawn up into the cutting through the stem where it supplies the plant with moisture. Too much water in the rooting medium can cause the stems to rot and a misting system is a great way to control the amount of moisture in the rooting medium.
Another thing the moisture that is deposited on a cutting does is to keep the cutting cool. Plants go through a process called transpiration. This transpiration process is quite similar to our perspiring because it allows the plant to release water through its leaves which cools the plant off. This transpiration process is what actually draws the water up the cuttings stem and incorrect amount of water on and around the cutting can greatly affect the process.
How a misting system controls the environment around a softwood cutting.
A misting system controls the environment two ways.
- It controls the amount of mist the cuttings receive.
- It controls how often the cuttings receive the mist.
The amount of mist a cutting receives is called the duration. This duration can be anywhere from a few seconds to a few minutes depending on the environment and conditions the cuttings are being rooted in. Typically the duration would be between 6 and 14 seconds when rooting woody ornamentals.
How often the cuttings receive mist is called the frequency. This frequency can be between 2 to 10 minutes, again, depending on the specifics of the rooting environment. Typically the frequency would be 5 or 10 minutes for woody ornamentals.
Properly setting up the misting system to deliver the correct amount of moisture to the cuttings ensures they are in an environment that is suitable for rooting.
Part 2 will address other factors to consider when rooting softwood cuttings.
Visit the Plant Propagation Misting System website for more information about misting systems and free plant propagation information.
Article Directory: EzineArticles
Animal Cooling Systems bring Relief To Horses And Livestock
Most of us are familiar with outdoor misting, and have felt the relief a good misting system can bring when warmer temperatures arrive. But what about animals or livestock? Horses, cows, and chickens are just a few of the animals that have a very low tolerance for heat stress, and are at risk of health problems if left in adverse conditions. Fortunately, the concept of misting has made its way to the barnyard as well. Horse owners, farmers, and the like are depending more and more upon animal cooling misting systems to provide their animals with much needed relief.
Different than a typical misting fan, animal cooling systems use flash evaporative cooling to bring down temperatures far more effectively than regular fans ever could. Using atomized water droplets, they “flash cool” the hot air found in a barn or stall instead of simply moving the air around. A built-in filtration system and water conditioning module helps the system resist the build-up of scale and lime deposits. Best of all, advanced misting systems such as these are easy to use. A standard garden hose water connection makes for an easy hook up, while oversized wheels make transport over rough terrain an easy to achieve task.
Horses are among the animals most at risk during summer, when high temperatures and humidity combine to make body heat accumulate faster than your horse can get rid of it. But they are not alone in being at risk. Cows are vulnerable to heat stroke or even death due to high temperatures, which can also adversely effect milk production as well as the egg output of chickens by 20-40% during the summer months. Livestock cooling systems can eliminate these issues by reducing temperatures by as much as 20 degrees or more.
Keeping your horses or livestock cool during the summer is more than just an act of kindness. It’s a matter of safety. Animal cooling misting systems act as the first line of relief when temperatures rise, and make conditions comfortable and livable for the animals we love and depend on. Summer will be here before you know it. Make sure the coolness and comfort you provide for yourself and your family extends outdoors to the horses and livestock that can truly use it on a summer day.
Article Directory: EzineArticles
Mister Nozzles – Build your own PVC mister
If you think you might like to try to make your own misting system on the cheap, check out these instructions for how to Build your own PVC mister. The mister shown is meant to be for cooling off a pet, with only one mister nozzle. And it uses the cheap plastic mister nozzles. But the design could be modified to use more reliable brass and stainless steel mister nozzles.
If your dog suffers from hot weather like mine you can build this PVC pipe mister for about $10.00. Construction only takes a few minutes after you have all the required parts and tools.
Cheap Do-It-Yourself Mister
If you’re looking to save money and just build a cheap mister system, the article below will tell you how. But by the time you put it together, fix the leaks, and get it working the way you want, it might be cheaper and easier to just buy one that’s ready to go and is a lot more efficient. If you’ve already got a fan at the house (most of us who live in hot weather do), you should try try one of our low-pressure mister fan mist rings with the hose adapter kit. Just zip tie the mist ring to your fan, hook up the hose, plug the fan into a GFCI (ground fault outlet, to protect you from electrical shocks), then turn on the fan and the hose.
Easy steps to build your Mist system
To prevent getting affected due to the sun’s radiation mist systems are used commonly. They are an indigenous invention where fine droplets of water are let out which in turn vaporizes and thus cool the atmosphere it is it. The vaporization of this mist results in instant cooling of the air that surrounds it. They are used outdoors in most cases and during hot climates to keep people cool. They save your skin from terrible trouble that sun’s powerful radiations are capable of. They also keep your pets cool and devoid of uneasiness during the scorching summer months. You can make a structure that keeps you cool all by yourself at home!
Materials needed – The materials that you would require to complete constructing a mist system at your home are;
1. Garden hose – 1
2. .75 – garden hose adapter – 1
3. Spray bottle (with a screw cap)
4. Water supply
It is very simple to make a homemade cooling system. The materials needed are commonly available at any home.
And now let’s see the construction;
Construction:
Clean the spray bottle and its cap thoroughly. This will ensure that there is no dust or unnecessary particles in your bottle or spray nozzle. Then screw up the hose adapter to the bottom of the nozzle of the spray bottle. Make sure they are fastened tightly so that leakage will be prevented. Then attach the hose to the adapter. Even this part should be fixed as securely as possible to prevent any future leakage. Allow the water to pass through at a low speed. Now rotate the cap on the nozzle of the sprayer bottle so that water escaped freely. The amount of water that comes out and the speed at which it comes out solely depends on the nozzle that you use. You may be required to tape or glue some parts so that water flows out freely and at the right amount. If there is too much imbalance, then make use of rubber bands to secure it temporarily.
Usage
After constructing the system, it is essential that you use it properly to get the most of what it can offer to you. Firstly hang it at a convenient place of your wish in the air. This place should be the one that you want to cool down. If there is no room to hang it then with the help of a rotating fan you can diffuse the mist from the hose. This also gives room to faster evaporation process. But care should be taken while you fix a fan in front of the hose. Neither should be disturbed. Otherwise an electric fault may be caused as a result. High temperatures are the best time to obtain the benefits of this product.
John peter is an expert SEO copywriter for pool cabana. He has been written many articles like mist cooling system, shade sails, home misting system, fogging systems, portable misting fan and more. For more information visit our site cool-off.com. Contact me at cooloffarticle@gmail.com
Article Directory: Article Dashboard
WindChaser Misting Fans Will Cool Your Body in All Uncomfortable Conditions
The guest article below discusses WindChaser Outdoor Misting Fan
WindChaser Misting Fans Will Cool Your Body in All Uncomfortable Conditions
Marina del Rey, California is perhaps known for its reputation as one of the largest man-made small boat harbors worldwide. It has 19 marinas and can accommodate up to 5,300 boats. Famous for its iconic waterfronts, Marina is also a hub for tech corporations, such as, Gravity Interactive and The Brain Technologies, and innovate manufacturing companies like WindChaser Products, Inc.
Held as the pioneer in avant-garde products, such as remote controlled fans, WindChaser is also highly touted for their amazing fans, particularly their misting fans.
WindChaser misting fan uses flash evaporation to give a cool and refreshing air. Like all other fans, it is equipped with electric power motors and blades. Yet WindChaser misting fans have built-in high-pressure water pumps that spray out fine water droplets through nozzles. The fine water particles evaporate quickly upon being jetted out at a high speed. The quicker the fine water particles evaporate, the lower the temperature of the surrounding air will be.
Another great thing with WindChaser fan misters is that they usually come with remote controls. It is arguably annoying sometimes to adjust a fan’s oscillating movement. Let us say, you are enjoying a good basketball game during a hot summer noon. You are drawn with the action on the court and start perspiring. The problem is that the fan is a few feet away and you need to stand in order to adjust its motion and focus it towards yourself.
For sports fans, every second of the game is important. So it is really irritating if you can’t adjust the fan’s motion remotely. But with a WindChaser misting fan, that is not a problem. WindChaser really is committed in bringing comfort to your home. So WindChaser made sure that you can relax in your home by including remote control systems with their WindChaser misting fans.
Benefits of indoor WindChaser fans:
Good indoor air circulation is really important. If the air inside your house is circulated properly, there will be lesser chances that air-borne toxins will build up in your house. Although you can get good air circulation with an air conditioner, you can do the same for a lot less cost with an indoor WindChaser fan mister. Obviously, the air conditioner consumes more electricity than an indoor WindChaser misting fan. So you can actually cut your power bill with an indoor WindChaser misting fan, especially during the hot summer days.
Benefits of outdoor WindChaser fans:
The outdoors is the place where fun happens during summer months. Families barbecue outside, kids play in the lawn, couples relax in the patio, and so on. So an outdoor WindChaser misting fan would really maximize the fun people experience outdoors by providing optimum comfort. Outdoor WindChaser misting fans are not heavy and can be easily moved to almost any location.
One thing that set apart WindChaser from other fan makers is their commitment to provide outstanding support to their customers. WindChaser has a very informative web site where customers can view general troubleshooting procedures when they are having difficulties operating their fans. And not only that, you can also call, mail, or email them anytime you have problems with their products.
Greg has been writing articles for over 4 years. Please visit his latest website about the coolest home improvement at Fan Mister, with information on finding the best WindChaser misting fan line, as well as ideas and discussions that any home improvement enthusiast would be interested in.
Article Directory: EzineArticles
Portable Misting Fans – Cooling Without Hassle
The weather changes quite unpredictably these days. On days where the sun scorches and humidity builds up, you would perspire more rapidly and this causes discomfort. To keep cool, you will need an effective cooling system. Portable misting fans are the perfect solution because it works on an evaporative cooling method. It produces a stream of cooling mist with minimal use of water. The nozzles can be adjusted accordingly to determine the amount of water vapor released. It allows conservation of resource because it is estimated that only 1 gallon of water is required to produce an effective cooling for one hour.
Thus, the lower pressure requirement means that less energy is required to produce the needed pressure. Most portable misting fans also allow detachable misting system. This allows you to use your fan as usual without the release of mist. Likewise, you can also turn the mist on without using the fan. The fan actually helps to disperse the mist to larger areas but you can equally enjoy the cooling mist at close distance.
It can also be placed conveniently in shops, garages, warehouses, outdoor cafes and backyards. Its portability feature allows you to move it wherever you choose to. You can even have it in your backyard for a party today and in the garage on the next while you repair your car. Most portable misting fans have allows height adjustment. Its effectiveness is more noticeable in humid conditions. To maintain the function of the fan, the filters should be changed yearly and water tanks be conditioned routinely. This helps to keep the fan in optimal working condition.
Portable misting fans should be considered if you are looking for a cooling system that not only cools, but is environmental-friendly and highly efficient. The many features of the misting fan allow you to use it according to your preferences.
Francis enjoys writing and sharing articles on portable misting fans. Visit for more details.
Article Directory: EzineArticles
Accessories For Greenhouse Greatness
Greenhouses are not just static structures that stand empty. They have moving parts and are filled with benches, tools and many other accessories that help support and care for the plants housed there. Tools, measuring instruments, and the like naturally come to mind for any avid gardener. But there are dozens of accessories for the greenhouse itself, as well.
Louvre’s, glass or plastic shutters that admit air, are often part of greenhouse design. They help ventilate the interior, a problem in areas where summer sunlight hours are long and hot. Like anything else, they can break and need to be replaced.
But even when they don’t break, the greenhouse shopper may want to consider replacing them with auto-louvres. These clever devices allow opening and closing the shutters automatically. Some work on a timer, others are triggered by temperature.
Galvanized steel braces are available that will allow you to shore up the base of your greenhouse. They act somewhat like a metal strap around a wooden barrel, giving it additional strength and supporting the structure. This can help prevent collapse during storms and even increase the support for the roof under heavy snow load.
Shelves have gone from static and boring to functioning works of art. There are aluminum shelves that can interchange heights. Others can be re-arranged into different geometrical shapes for attractive displays and maximizing space usage. They come in a variety of colors, with plastic liners, wheels and all sorts of different options.
Rainwater kits are a great addition to any greenhouse. They make watering the plants a breeze and optimize your water use. You can get small, single nozzles or entire tracks. Some have misting attachments, movable heads and other gizmos. Many are controllable by digital 24-hour/365-day timers.
Of course, when it comes to tools and instruments, the number and variety of available choices is just astounding. Soil thermometers, salinity gauges, moisture-level testers, phosphor and nitrogen level monitors… you name it.
There are heating devices in dozens of different styles. Some lamps or ‘toaster-coil’ types will spot heat a corner. Others, such as track systems, can be attached to the roof and heat the entire greenhouse in the winter.
A chemical factory of cleaning aids can be had today. Mildewcides, calcium carbonate removers, window cleaner, cement floor cleansers… an endless choice.
Ordinary garden tools are now made of many more materials than ever before. Don’t like metal trowels? Get a composite that’s stronger than steel and lighter than plastic. Want a shovel that telescopes out five feet or collapses to 12 inches, with a three-inch wide mouth? No problem.
So far, there doesn’t seem to be a tool that will robotically remove aphids or plant tulips, but it can’t be too far in the future.
Every kind of book imaginable to help you build your greenhouse, maintain it and care for the plants inside can be had online. If there’s a subject you need to know about, finding the information – and the tools to help you act on it – is just a few clicks away.
Kevin runs an online florist in Singapore, visit him at Singapore online Florist
Article Directory: Article Dashboard
The uses of high pressure mist cooling system
Keeping cool during hot summer days is not a problem anymore. With the advent of high pressure misting systems, the summer predicament can be tackled. The mist cooling systems gives natural cooling when installed and it is almost very easy to maintain. The misting systems can be used indoors as well as outdoors. The patio misting system which can be installed in the patios gives cooling effect to the indoors and the portable misting fans would be of great use in the outdoors. The high pressure misting systems make sure that the temperature of the surrounding area is kept down.
The misting systems are of great use in green houses as it helps in maintaining the moisture in the air. It also prevents the wilting of plants on very hot days. Even the mist cooling system has helped in increasing the productivity of plants. However, many people are still unaware of the cooling system. And some believe that the system involves complex working mechanism.
The working of the fogging system is actually very simple. The system would have high pressure water pump with nozzles in the end. Tiny droplets of water are sprayed through the nozzle and they evaporate quickly leaving the area with a chill feeling. The water drops are so small that they evaporate so quickly without getting anything wet. Moreover, it would not leave any moisture residue in furniture and electronic equipment to cause damages. In case of a misting fan, a fine mist of water is sprayed beyond 5 or 6 feet around thereby cooling the temperature. Here, the cooling process is accelerated due to the oscillating motion of fan. The misting system is capable of cooling the air temperature up to 25 degrees. The misting systems can produce 1000 PSI high pressure which causes the mist to evaporate completely and quickly.
With the increasing demand for the mist cooling systems, a number of companies have been offering the systems in the market. It is very easy to search and find a desirable mist cooling system in the internet that would satisfy your needs. There would be varieties of portable misting fans and also misting systems with mist lines and mist nozzles.
The installation and maintenance of high pressure mist line systems is also relatively simple. They are installed using overhead waterlines from which water is sprayed downwards in a fine mist. The system would even suit the pets as they are specially designed to satisfy them too. The misting lines would keep your pet cool during hot days. Yet another advantage of the system is that it drives away insects from the surrounding area. Moreover, the patio misting systems would control the dust ad odor that arises during summer days. The misting fans are available in different varieties like pedestal, wall, floor etc.
The high pressure misting systems are also used in work places like outdoor restaurants and leisure spots like zoo. This would keep the animals cool along with creating a mist effect giving an added attraction. They are also used on livestock and farms so that the productivity level of animals would be increased.
John peter is an expert SEO copywriter for portable misting systems, patio misting, shade structures, outdoor mist cooling system, Patio Misting Systems, shade sails, patio misters, sun shades, misting systems, mist system and more. For more information visit our site cool-off.com. Contact me at cooloffarticle(at)gmail.com
Article Directory: Article Dashboard
To Get Rid Of Mosquitoes – Mosquito Misting Systems Are The Best Remedy
Houston, Plano, Austin, Atlanta, Dallas are the cities in Texas that are over flooded with mosquitoes, and we are very much aware that they infect us with the deadly West Nile Virus, malaria and other Diseases and caused millions of deaths every year. As we know prevention is the best cure, so its better to control the mosquito before it bites you.
During mosquito season, people will do almost anything to get relief form this, they light candles, use mosquito squatter, install bug zappers or apply any non-prescribed creams, sprays and other chemical based products on their own skin.
But mosquito misting systems or the pest control systems are the answer to safe, effective mosquito control. As per experts mosquito misting systems are the best over killer that too at worse health risks. Today mosquito misting systems are completely effective and guaranteed to eliminate mosquitoes and other insects from any residential properties.
Increasingly popular are mosquito misting systems or the pest control systems that are installed around the perimeter of homes. The automated mosquito misting systems use Pyrethrum which is an active ingredient for pest control Systems and is derived from an extract of chrysanthemum flowers African Daisy. Oil is extracted from the seeds of these flowers to be used as Pyrethum. The seeds are then crushed and used to make mosquito coils burned in tropical climates around the world as a mosquito repellent.
Pyrethrum is not only control mosquitoes but also it is used for pest control systems as it activates the hidden insects, driving them from cover and into contact with the main insecticide. This “flushing” action has been most successful in the control of such pests.
Pyrethrum has been EPA registered for more than 3 decades and is the model from which scientists have derived numerous synthetic insecticides. Natural pyrethrum is a high efficient insecticide and safe to human and environment and hence it can be best choice for your backyard, gardens, courtyard, patio, porch or swimming pool. Although the mosquito misting systems needed to be installed by a professionally trained and licensed pest control professional.
To conclude, if you want to get rid of mosquito/ insects around your residential area, Automated Misting System is the best solution as it Kills Mosquitoes, Flies, Bees and other biting stinging insects and very much safe to human and environment.
An automated mosquito control systems provider, providing you the most effective services to get rid from insects, pests and mosquitoes having offices in Houston, Plano, Austin, Atlanta, Dallas and other Texas area. One can also request a quote online.
Article Directory: EzineArticles
The Windchill Misting Fan Line is Considered Among the Finest Fan Mister Systems Anywhere
The guest article below discusses the benefits of a Windchill Misting Fan
The Windchill Misting Fan Line is Considered Among the Finest Fan Mister Systems Anywhere
There are a zillion fan makers out there, but one particular manufacturer stands out: Windchaser Products, Inc. And one of the highly touted Windchaser line is the Windchill misting fan. What makes the Windchill misting fan so special?
First, is that it really produces a cool air. Using flash evaporation, it sprays out fine water particles that evaporate quickly into the air and lowers the apparent temperature to up 25-30 degrees Fahrenheit.
Another thing that is great with the Windchill fan mister is has effective coverage. This is not like your old school fan that can only cool an area of several meters. The Windchill misting fan is a fan with a muscle: it can cool an area of about 640 square feet.
It is also very convenient to use. Windchaser has made it a point to bring convenience and comfort to the homes of their customers. They are the pioneer of the remote-controlled fan. With a very convenient and easy-to-use remote control system, you can definitely relax with the Windchill misting fan.
You can also be assured that your Windchill fan would last. It is not like other fans that begin to rust after a year or so. No. The Windchill misting fan is built to last long. All of its components are rust free.
Indoor benefits:
Studies have revealed that the indoor air quality of your home is very important. Most people think that they can have good air quality with an air conditioner. Well, the traditional air conditioner will really give you cool air, but it decreases the humidity in room space while air is being circulated. Cold dehumidified air is not good for your health. So if you or your family has a respiratory problem, you might think of getting a Windchill misting fan.
The Windchill fan mister can be used indoors. What about the mist it generates? Well, if you will use it indoors, you have the option to not allow the fan to spray out as a mist. It has a high performance oscillating system (90 degrees oscillating function) that can definitely circulate the air inside any room in your house without dehumidifying the air.
Summer is really a time of fun. But it is also a time when it is the temperature is very, very HOT. But with a Windchill fan mister, you can definitely enjoy the summer outdoors. Its effective and large coverage is perfect for outdoor activities, like barbecuing in the yard and family gatherings in the patio.
Save more money with a Windchill misting fan:
It is known that the power bill spikes up during summer months. But this is only for those who rely on traditional air conditioning to cool one or several rooms in their house. Air conditioners have very high wattage compared to misting fans, like Windchill, that can be used indoors. So if you are looking to cut your power bill during summers, you can do that by getting a Windchill fan for one or several rooms in your house.
Great Customer Service:
And what’s really great with buying a Windchaser product like the Windchill misting fan? Well, you can say that the fan is really of first-class quality. But the great thing is that you will also get a lot of help from Windchaser once you already bought the unit. Windchaser is really great because they provide optimum customer support. You can go to their web site for troubleshooting steps or contact them by phone, mail, or email if the troubleshooting steps on their site won’t suffice to fix the problem with your unit.
Greg has been writing articles for over 4 years. Please visit his latest website about the coolest home improvement at Fan Mister, with information on finding the best Windchill misting fan line, as well as ideas and discussions that any home improvement enthusiast would be interested in.
Article Directory: EzineArticles
Create Your Own Greenhouse As A Hobby
For people who would like to do more gardening but live in a short growing season area, a hobby greenhouse is the answer. A hobby greenhouse is not large enough to produce vegetables or flowers on a commercial basis. It will, however, give you a place for a tomato plant or two and some fresh greens even if you live in the northern regions. Greenhouse enthusiasts even have their own association, called the Hobby Greenhouse Association, which publishes a quarterly magazine. The organization also sponsers events and helps individuals connect to get help with the aspect of gardening that they are interested in, whether it’s growing cacti or saving seeds.
If you are in the market for a hobby greenhouse, there are several types on the market. The smallest type is not large enough to walk into and must be accessed from the outside. It resembles an old-fashioned phone booth made all of glass and outfitted with shelves. This type is designed to fit as many plants as possible in as small a place as possible. The shelves are made of glass to allow as much light as possible to reach plants on the lower shelves. Another inexpensive version of this sort of hobby greenhouse is shelving covered with a zippered tent of clear plastic. This sort of arrangement is great for the small-scale hobby gardener wanting a place to keep her flowers or houseplant starts.
There are a variety of designs of hobby greenhouse that are large enough to walk into but made entirely of clear glass or plastic. They are often about the same size as a small storage building. Some independent builders have started making these to sell locally. Among national brands, one of the nicest is called the “Solar Prism.” It is called this because of it’s unique construction. This hobby greenhouse is made of a single piece of durable clear plastic which is designed to work like tiny prisms side by side. They trap the rays of the sun and shoot them back into the greenhouse at all angles. For this reason, these little greenhouses are said to glow when the weather is cloudy.
Better hobby greenhouses are equipped with automatic sensors that open vents which allow ventilation and keep the interior temperatures from getting too high. These are a great labor saver, but can get expensive. Another benefit sometimes found in nicer greenhouses is a built in irrigation or misting system. Members of the Hobby Greenhouse Association, or HGA, have invented many interesting designs of greenhouses.
If gardening is your hobby, greenhouse growing will interest you. With a greenhouse, you can have the earliest tomatoes and salad greens all year. You can also start seedlings for the main garden early in the spring when outdoor temperatures would kill them. A hobby greenhouse can be a good investment.
To learn about growing chives, how to freeze green beans and other information, visit the Gardening Central website.
Article Directory: Article Dashboard
Warehouse Cooling – From Misting Fans to Evaporative Coolers for …
Warehouse Cooling – From Misting Fans to Evaporative Coolers for Comfort, Safety, and Productivity By Dave P.
Warehouse cooling could be the best investment you can make for productivity of workers…and your bottom line. In fact, in a NASA study on the effects of heat on workers output, they found that workers in a 75 degree space were 29% more productive than those at 90 degrees, and work accuracy improved by 300 percent! Fewer water breaks are necessary, morale is higher, and fewer mistakes are made. Not to mention the savings on lost time when workers go out with heat related injuries.
Options range from misting fans to evaporative coolers, to a tool you never thought you could use indoors…high pressure misting systems! And there are more tools out there. But a properly planned warehouse cooling system can be an easy investment that pays big dividends.
A variety of products exist that can very effectively cool large spaces or spot cool small ones…depending on your specific needs.
Misting fans are the ultimate warehouse cooling machine for large spaces. These misting fans can produce up to 11000cfm of wind. High pressure misting rings are added to the face of the fan. The breeze combined with the evaporative cooling power of mist can cool the space by up to 35 degrees if used properly. The result is an awesome warehouse cooling tool that can cool up to 3000 square feet! The best strategy is to put them in opposite corners, or all 4 corners of the warehouse, and mount them up high. Normally one misting pump can run all 4 misting fans.
Evaporative Coolers can be great for spot cooling or warehouse cooling for smaller spaces. Medium sized evaporative coolers resemble the 4×4 swamp coolers you have probably seen. Evaporative coolers can come with an oscillating spout that effectively spreads cool air over a greater area. Those are better spot cooling in assembly areas or on loading docks, where 500 square feet or less needs spot cooling. Another nice choice is a 4 sided model that blows cool air from all 4 sides. Place these in the center of a smaller work area for spot cooling of everyone around the machine.
Misting Systems can also be used for warehouse cooling where open doors or vents allow hot air to pour in. On loading docks especially, a lot of hot air can pour into the warehouse. This is where high pressure misting systems can be a big help. The strategy is to hang a “curtain of mist” across every door. The warm air coming in is evaporative cooled as it comes through. And with high pressure misting, the water actually evaporates into the air, so nothing gets wet or slippery down below. Each dock door actually functions as a large evaporative cooler! Using the same misting pump, lines can be run across every dock door, every inflow vent, and any other openings in the building. Misting fans can be run off of the same fan as well for additional cooling. Out with the hot, in with the cool. The results can really be amazing. And workers loading and unloading trucks can work with greater comfort and safety near the doors.
These are just a few of the common solutions to warehouse cooling needs. With a little research and planning, you should be able to make huge improvements in the efficiency, safety and productivity of all of your workers…and your warehouse facility as a whole. It can be the best investment you’ll make in your operation.
Information provided by mistingpros.com – Your source for quality evaporative coolers, misting systems and misting fans.
Article Directory: EzineArticles
A guide to Misting systems
During summer, having an air conditioner outdoor may be relaxing for family members. In Middle of Summer, many people don’t like to stay outdoors as sweat keeps rolling down their face and skin. Misting systems can improve your outdoor and lifestyle! Do you want to spend more time out by the pool? Your patio or outdoor space can be cooled quickly by as much as 35 degrees due to misting systems. Buying a misting system can be very effective for people as they can sit in their backyard for long hours and have fun. Misting system are big, industrial-looking fans that spray a misty stream of water on your body.
Misting systems can be effective for other purposes like frost protection, air filtration, dust abatement, odor removal, fire and smoke control and more. Certain industries like restaurants, poultry and dairy farms, zoos and amusement parks, golf courses, tennis courts, metal forging etc it use it.
Different types of misting systems:
High Pressure misting systems:
High pressure systems are chosen for applications where maximum cooling is needed. These applications would include residential areas, restaurants, amusement parks, sports stadium, hotels and resorts. Other benefits include they can control odors and dust and used to add humidity to a green house or other environments. High pressure systems are also used for fire and smoke control, frost protection and visual effects in a pool, garden or other areas.
Patio water misters:
Patio misting systems are effective in dry and desert climates which add therapeutic moisture to the air. Benefits of this misting system are they can cool the environment and reduce dust, pollen and other airborne pollutants. In addition, it can reduce the temperature in a given area by up to 30 degrees. To achieve maximum cooling result, it is advisable that customers install their patio misting systems at least 10 feet off the ground. Depending on the usage, it is important that you remove the nozzles to clean them. In most cases, this should be done every few months.
Fog Misting Systems:
Before purchasing a fog misting system, carefully evaluate the product. Look for a UL Listing and a CE certification. Ask for quite operation, low maintenance and long life. Make sure that the product you purchase is manufactured from a reputable company which has at least 10 years of experience in the industry and always ask for product warranty. This product is used in backyard patios as well as large commercial venues such as restaurants, hotels, resorts or amusement parks.
Benefits:
One biggest advantage is that air temperature can drop drastically by up to 35 degrees F.
Second advantage is that mist keeps flying insects like mosquitoes, flies, wasps, hornets and spiders away from the area. Mist can also clean the surrounding area away from dust, smoke, pollution and other common pollutants.
Third benefit is pets can spend time with you in the mist area as they also get hot.
John peter is an expert SEO copywriter for misting systems. He has been written many articles like patio misting systems , sun shades, shade structures, pool cabana, wall mount umbrellas, shade sails, fogging systems and more. For more information visit our site cool-off.com. Contact me at cooloffarticle(at)gmail.com
Article Directory: Article Dashboard